VHDCI 68 Female / IDC 50 Male, with Terminator

Item# 31N3-06310

$44.80

Product Description

VHDCI 68 Female / IDC 50 Male, with Terminator। This unit will Terminate a VHDCI 68 or an IDC50 signal.

Buy More Cables at www.worldofcables.biz

HPCN80 (SCA80F) Female / HPDB68 Female / IDC 50 Male, SCSI Adaptor

Product Description

HPCN80 (SCA80F) Female / HPDB68 Female / IDC50 Male, Molded Adaptor.

Buy More Cables at www।worldofcables।biz

CABLES TO GO 6ft DOUBLE SHIELDED SCSI-1 DB25M/C50M SYSTEM CABLE

CABLES TO GO 6ft DOUBLE SHIELDED SCSI-1 DB25M/C50M SYSTEM CABLE


Product Description
Connects DB25 SCSI port on a PC or Mac to an external SCSI-1 device
Features:
SCSI-1 Cables provide you with the performance you expect from your SCSI devices. These SCSI-1 cables feature the DB25-pin found on SCSI host adapters on PCs or Macs to a 50-pin Centronics connector most often found on peripherals. With the Male-to-Male cable you can connect one peripheral directly to your SCSI host card.
Designed with a foil and braided shield overwrapping a twisted-pair construction, providing maximum immunity to EMI/RFI interference combined with a high quality wire that provides data integrity. Molded connectors provide strain relief and add additional protection against EMI/RFI interference.
Connectors: DB25-pin Male to Centronics 50-pin Male
Cable Type: SCSI-1
Primary Use: Connecting the DB25 SCSI port on a PC or Mac to an external SCSI-1 device
Applications: Scanners, external storage devices and other SCSI-1 peripherals
Specifications:
Color: Beige
Size: 6ft
Weight: 1.04lbs





Buy More Cables at www.worldofcables.biz

CABLES TO GO 0.5m SAS 32-PIN to 4 SAS 29-PIN + 4-PIN POWER CABLE

CABLES TO GO 0.5m SAS 32-PIN to 4 SAS 29-PIN + 4-PIN POWER CABLE

Product Description

SAS is the next-generation interface standard for SCSI-based systems. It is designed to replace the SCSI parallel interface with much faster, more flexible, 3Gb/s Serial Interface while maintaining the robust nature of the SCSI Command Set.

The flexibility of SAS facilitates many system-level configurations such as workstations, blade servers, external storage arrays, SAS Expanders, Host Bus Adapters (HBA's) and RAID controllers.

Buy More Cables at www.worldofcables.biz

LVD / SE VHDCI 68 Male Ext Terminator, One End with LED

LVD / SE VHDCI 68 Male Ext Terminator, One End with LED



Product Description
LVD / SE VHDCI 68 (0.8mm) Male Exterior Terminator, Active with LED. This unit is designed to terminate VHDCI 68 cables.



Buy More Cables at www.worldofcables.biz

IDC 50, Male, One End, Active Terminator

IDC 50, Male, One End, Active Terminator



Product Description
IDC50 Male, One End, Active Terminator. This unit is designed to terminate an IDC50 SCSI cable.



Buy More Cables at www.worldofcables.biz

HPDB68 Male / IDC 50 Male, Internal SCSI Adaptor

HPDB68 Male / IDC 50 Male, Internal SCSI Adaptor


Product Description
HPDB68 Male / IDC50 Male, Internal Adaptor. This adaptor will convert an HPDB68 signal into an IDC50 signal.

Buy More Cables at www.worldofcables.biz

IDC 40 x 2, 18 inch, Single Device

IDC 40 x 2, 18 inch, Single Device

Product Description
IDC 40 x 2, ATA-33, 18 inch Single Connector. IDE cables are designed to connect internal devices in your computer to the motherboard. The devices would include; CD-ROMs, Zip Drives, Hard Drives, DVD-ROMs, CD Burners, etc… IDE slots on the motherboard can only support up to 2 devices. Some IDE cables have more connectors. Those cables are for cases or situations where you need to have a longer cable or to have some variety and options to place the devices where you choose.


Buy More Cables at www.worldofcables.biz

CABLES TO GO INTERNAL SCSI ULTRA160 MD68F LVD/SE TERMINATOR

CABLES TO GO INTERNAL SCSI ULTRA160 MD68F LVD/SE TERMINATOR

Product Description
INTERNAL SCSI ULTRA160 MD68F LVD/SE TERMINATOR
Features:
For internal low voltage differential or single-ended SCSI Ultra160 end-of-line termination.
We offer a wide variety of SCSI Terminators to optimize the performance of your SCSI bus - from the popular passive and active terminators for single-ended SCSI applications, to the active negation and hard-to-find, premium-quality forced perfect terminators. Picking the right terminator is vital to the performance of your SCSI chain. LVD/SE terminators supports both the new LVD (Low voltage differential) specification as backwards compatibility to SCSI, SCSI-2, and SPI single-ended specifications. Multimode compatibility permits the use of legacy devices on the bus without hardware alterations. For LVD termination, the terminator integrates two regulated supplies with nine precision resistor strings. For SE termination, one regulator and nine precision 110ohm resistors are used. Automatic mode selection is achieved through voltage detection on the diffsense line. Before you can connect your expensive SCSI equipment, make sure you make the right connection with a Worldofcables Terminator!
Connector: Ultra2 68-pin Female
Termination: LVD/SE
Designed For: For internal low voltage differential or single-ended SCSI Ultra2 end-of-line termination
Specifications:
Warranty: Lifetime
Color: Black
Mfr: Worldofcables
Weight: 0.09lbs

Buy More Cables at www.worldofcables.biz

CABLES TO GO 6ft DOUBLE SHIELDED SCSI-1 DB25M/C50M SYSTEM CABLE

CABLES TO GO 6ft DOUBLE SHIELDED SCSI-1 DB25M/C50M SYSTEM CABLE


Product Description
Connects DB25 SCSI port on a PC or Mac to an external SCSI-1 device

Features:

SCSI-1 Cables provide you with the performance you expect from your SCSI devices. These SCSI-1 cables feature the DB25-pin found on SCSI host adapters on PCs or Macs to a 50-pin Centronics connector most often found on peripherals. With the Male-to-Male cable you can connect one peripheral directly to your SCSI host card.
Designed with a foil and braided shield overwrapping a twisted-pair construction, providing maximum immunity to EMI/RFI interference combined with a high quality wire that provides data integrity. Molded connectors provide strain relief and add additional protection against EMI/RFI interference.

Connectors: DB25-pin Male to Centronics 50-pin Male
Cable Type: SCSI-1
Primary Use: Connecting the DB25 SCSI port on a PC or Mac to an external SCSI-1 device
Applications: Scanners, external storage devices and other SCSI-1 peripherals

Specifications:

Color: Beige
Size: 6ft
Weight: 1.04lbs

Buy More Cables at www.worldofcables.biz

SCSI III (HPDB68 Male) Internal Cable, 2C, 1 Device, 20 inch

SCSI III (HPDB68 Male) Internal Cable, 2C, 1 Device, 20 inch

Product Description
This cable is for connecting internal SCSI devices.

Buy More Cables at www.worldofcables.biz

Ultra 160/320 LVD HPDB68M SCSI Internal Cable with LVD Terminator, 8C, 6 Devices, 53

Ultra 160/320 LVD HPDB68M SCSI Internal Cable with LVD Terminator, 8C, 6 Devices, 53



Product Description
This cable is for connecting internal SCSI devices.

Buy More Cables at www.worldofcables.biz

IDC 50 x 3, 24 inch, Dual Device

IDC 50 x 3, 24 inch, Dual Device




Product Description
This cable is for connecting internal SCSI devices.

Buy More Cables at www.worldofcables.biz

HPDB68 Male / Centronics 50 (CN50) Male, Mold, 25 Pair, D / S, Latch, 3 ft

HPDB68 Male / Centronics 50 (CN50) Male, Mold, 25 Pair, D / S, Latch, 3 ft




Product Description

HPDB68 Male / CN50 Male, Molded, 3 ft. Latch Type. SCSI III Cable. Beige molded PVC hood fully shielded with Aluminum Mylar. Connector wrapped with Aluminum Mylar Foil. Connectors are gold plated. 28 AWG, UL 2464. 25 Twisted Pairs + Drain Wire. Double Shi




Buy More Cables at www.worldofcables.biz

23in INTERNAL SCSI-1/SCSI-2 50-PIN CABLE 2-DEVICE

CABLES TO GO 23in INTERNAL SCSI-1/SCSI-2 50-PIN CABLE 2-DEVICE

Product Description

Adding additional drives to your SCSI chain is a snap with the Internal 50-pin SCSI Ribbon Cable. Offering you full functionality and constructed from high quality wire for true SCSI impedance meeting or exceeding applicable industry standards. Use this cable for a solid connection between your internal SCSI-1/SCSI-2 devices and your SCSI host controller.

* Connectors: 50-pin IDS Female to Two 50-pin IDS Females; one for the SCSI controller card, and two for a SCSI devices
* Devices Supported: 2
* Cable Type: SCSI-1/SCSI-2
* Connector Spacing: 0-16-23in
* Ideal for internal hard drives, cd-rom/cd-rw drives, removable storage devices, and other SCSI-1/SCSI-2 peripherals

Specifications:

* Size: 23in
* Weight: 0.18lbs

Buy More Cables at www.worldofcables.biz

Buy More Cables at www.worldofcables.com

CABLES TO GO 10ft SCSI-3 ULTRA2 LVD/SE MD68M/M CABLE (THUMBSCREW)

Product Description

Double-shielded Ultra2/Ultra3 LVD/SE external SCSI cable; Backwards compatible with SCSI-3 applications

Features:

Ultra2/Ultra3 SCSI provides the most competitive performance choice for high-traffic workstations, servers, multi-user systems, and storage area networks (SANs). External Ultra2/Ultra3 LVD/SE Cables meet these needs by increasing bus bandwidths, allowing greater configuration flexibility, backward compatibility, and faster transfer rates. Ultra2/Ultra3 cables support up to 80/160MBps performance, up to 16 peripherals without creating a bottleneck and for extended cable lengths of up to 12m.

* Connectors: Micro-Density 68-pin Male with Thumbscrews to Micro-Density 68-pin Male with Thumbscrews
* Cable Type: Ultra2/Ultra3 LVD/SE
* Wire: 34 pair, 28AWG, Aluminum-foil shielding with 10% overlap, 85% Tin Copper Braid, 140 Ohm maximum impedance
* Backwards compatible with SCSI-3 applications; Forward compatible with the Ultra320 specification
* Manufactured with double-shielded UL 20276 wire with twisted-pair construction minimizes interference ensuring error-free data transmissions
* Designed for: Connecting external RAID array, database servers, drive enclosures, etc. to a Ultra2/Ultra3 LVD/SE host adapter

Specifications:

* Color: Beige
* Size: 10 Ft.
* Weight: 1.41 lbs

Buy More Cables at www.worldofcables.com

www.worldofcables.biz

CABLES TO GO 6ft SCSI-2 MD50M/M CABLE

Product Description

Connects a SCSI-2 peripheral to either a SCSI-2 bus or another SCSI-2 perpherial

Features:

SCSI-2 Cables provide you with the performance you expect from your SCSI devices. These SCSI-2 cables feature the Micro-Density 50-pin connector found on Fast SCSI-2 host adapters and on many newer SCSI peripherals. With a Male-to-Male cable you can connect one peripheral directly to another, or to a SCSI host adapter.
Designed with a foil and braid shield overwrapping a twisted-pair construction, providing maximum immunity to EMI/RFI interference combined with a 132 Ohm impedence wire appropriate for faster bus speeds associated with SCSI-2. Shielding of the cable is meticulously handled by soldering 360 degrees from the shielding of the wire to the metal shell which shields the connector. The squeeze latches which fasten the cable to the device are solid, perfectly located for easy plug-in and removal, and ensure an on-going, dependable connection. Molded connectors provide strain relief and add additional protection against EMI/RFI interference.

* Connectors: Micro-Density 50-pin Male to Micro-Density 50-pin Male
* Cable Type: SCSI-2
* Primary Use: Connects a SCSI-2 peripheral to either a SCSI-2 bus or another SCSI-2 peripheral
* Applications: Scanners, external storage devices and other SCSI-2 peripherals

Specifications:

* Size: 6ft
* Weight: 0.77lbs


Buy More Cables at www.worldofcables.com

www.worldofcables.biz

CABLES TO GO 0.5m SAS 32-PIN to 4 SAS 29-PIN + 4-PIN POWER CABLE

Product Description

SAS is the next-generation interface standard for SCSI-based systems. It is designed to replace the SCSI parallel interface with much faster, more flexible, 3Gb/s Serial Interface while maintaining the robust nature of the SCSI Command Set.

The flexibility of SAS facilitates many system-level configurations such as workstations, blade servers, external storage arrays, SAS Expanders, Host Bus Adapters (HBA's) and RAID controllers.

Buy More Cables at www.worldofcables.com

www.worldofcables.biz

CABLES TO GO INTERNAL SCSI ULTRA160 MD68F LVD/SE TERMINATOR

Product Description

INTERNAL SCSI ULTRA160 MD68F LVD/SE TERMINATOR

Features:

For internal low voltage differential or single-ended SCSI Ultra160 end-of-line termination.
We offer a wide variety of SCSI Terminators to optimize the performance of your SCSI bus - from the popular passive and active terminators for single-ended SCSI applications, to the active negation and hard-to-find, premium-quality forced perfect terminators. Picking the right terminator is vital to the performance of your SCSI chain. LVD/SE terminators supports both the new LVD (Low voltage differential) specification as backwards compatibility to SCSI, SCSI-2, and SPI single-ended specifications. Multimode compatibility permits the use of legacy devices on the bus without hardware alterations. For LVD termination, the terminator integrates two regulated supplies with nine precision resistor strings. For SE termination, one regulator and nine precision 110ohm resistors are used. Automatic mode selection is achieved through voltage detection on the diffsense line. Before you can connect your expensive SCSI equipment, make sure you make the right connection with a Worldofcables Terminator!

* Connector: Ultra2 68-pin Female
* Termination: LVD/SE
* Designed For: For internal low voltage differential or single-ended SCSI Ultra2 end-of-line termination

Specifications:

Warranty: Lifetime
Color: Black
Mfr: Worldofcables
Weight: 0.09lbs

Buy More Cables at www.worldofcables.com

www.worldofcables.biz

0.8 MM / HPDB50 Male, VHDCI 68 SCSI Cable, 3 ft

Product Description
VHDCI 68 (0.8mm) Male / HPDB50 Male, Molded, 3 ft. Screw Type. SCSI III Cable. Black molded PVC hood fully shielded with Aluminum Mylar. Connector wrapped with Aluminum Mylar Foil. Connectors are gold plated. 30 AWG, UL 2464. 25 Twisted Pairs + Drain Wire

Buy More Cables at www.worldofcables.com

www.worldofcables.biz

CABLES TO GO 10ft SCSI-3 MD68M (THUMBSCREW) TO SCSI-1 C50M CABLE

Product Description

Ultra SCSI (or SCSI-3), is the latest of the ever improving SCSI standards, and is the cable of choice for such peripherals as the Iomega Zip Drive. It includes specifications for a single-ended as well as a differential bus style. The single-ended is similar to Fast SCSI-2, except it accommodates addressing up to 32 devices over a 16 bit single cable bus. This new style also increases data through-put up to 20 Mbps in single-ended applications. Single-ended SCSI-3 is limited to 4 devices over 3 meters or 8 devices over 1.5 meters. Differential SCSI refers to a bus configuration using two wires per signal, with the signal being derived by the voltage difference between the two wires. This approach effectively eliminates noise on the SCSI bus and allows bus length to increase up to 25 meters. If you need cables for differential Ultra SCSI applications, please call for help since they require different construction techniques.

Specifications:

* Size: 10ft
* Weight: 1.23lbs

Buy More Cables at www.worldofcables.com

www.worldofcables.biz

CABLES TO GO 10ft SCSI-3 ULTRA2 LVD/SE MD68M/M CABLE (THUMBSCREW)

Product Description

Double-shielded Ultra2/Ultra3 LVD/SE external SCSI cable; Backwards compatible with SCSI-3 applications

Features:

Ultra2/Ultra3 SCSI provides the most competitive performance choice for high-traffic workstations, servers, multi-user systems, and storage area networks (SANs). External Ultra2/Ultra3 LVD/SE Cables meet these needs by increasing bus bandwidths, allowing greater configuration flexibility, backward compatibility, and faster transfer rates. Ultra2/Ultra3 cables support up to 80/160MBps performance, up to 16 peripherals without creating a bottleneck and for extended cable lengths of up to 12m.

* Connectors: Micro-Density 68-pin Male with Thumbscrews to Micro-Density 68-pin Male with Thumbscrews
* Cable Type: Ultra2/Ultra3 LVD/SE
* Wire: 34 pair, 28AWG, Aluminum-foil shielding with 10% overlap, 85% Tin Copper Braid, 140 Ohm maximum impedance
* Backwards compatible with SCSI-3 applications; Forward compatible with the Ultra320 specification
* Manufactured with double-shielded UL 20276 wire with twisted-pair construction minimizes interference ensuring error-free data transmissions
* Designed for: Connecting external RAID array, database servers, drive enclosures, etc. to a Ultra2/Ultra3 LVD/SE host adapter

Specifications:

* Color: Beige
* Size: 10 Ft.
* Weight: 1.41 lbs

Buy More Cables at www.worldofcables.com

www.worldofcables.biz

CABLES TO GO 6ft SCSI-3 ULTRA2 LVD/SE MD68M/M CABLE (THUMBSCREW)

Product Description

Double-shielded Ultra2/Ultra3 LVD/SE external SCSI cable; Backwards compatible with SCSI-3 applications

Features:

Ultra2/Ultra3 SCSI provides the most competitive performance choice for high-traffic workstations, servers, multi-user systems, and storage area networks (SANs). Our external Ultra2/Ultra3 LVD/SE Cables meet these needs by increasing bus bandwidths, allowing greater configuration flexibility, backward compatibility, and faster transfer rates. Ultra2/Ultra3 cables support up to 80/160MBps performance, up to 16 peripherals without creating a bottleneck and for extended cable lengths of up to 12m.

* Connectors: Micro-Density 68-pin Male with Thumbscrews to Micro-Density 68-pin Male with Thumbscrews
* Cable Type: Ultra2/Ultra3 LVD/SE
* Wire: 34 pair, 28AWG, Aluminum-foil shielding with 10% overlap, 85% Tin Copper Braid, 140 Ohm maximum impedance
* Backwards compatible with SCSI-3 applications; Forward compatible with the Ultra320 specification
* Manufactured with double-shielded UL 20276 wire with twisted-pair construction minimizes interference ensuring error-free data transmissions
* Designed for: Connecting external RAID array, database servers, drive enclosures, etc. to a Ultra2/Ultra3 LVD/SE host adapter

Specifications:

* Color: Beige
* Size: 6 Ft.
* Weight: 0.95 lbs

Buy More Cables at www.worldofcables.com

www.worldofcables.biz

CABLES TO GO 6ft SCSI-3 MD68M (THUMBSCREW) TO SCSI-1 C50M CABLE

Product Description

Ultra SCSI (or SCSI-3), is the latest of the ever improving SCSI standards, and is the cable of choice for such peripherals as the Iomega Zip Drive. It includes specifications for a single-ended as well as a differential bus style. The single-ended is similar to Fast SCSI-2, except it accommodates addressing up to 32 devices over a 16 bit single cable bus. This new style also increases data through-put up to 20 Mbps in single-ended applications. Single-ended SCSI-3 is limited to 4 devices over 3 meters or 8 devices over 1.5 meters. Differential SCSI refers to a bus configuration using two wires per signal, with the signal being derived by the voltage difference between the two wires. This approach effectively eliminates noise on the SCSI bus and allows bus length to increase up to 25 meters. If you need cables for differential Ultra SCSI applications, please call for help since they require different construction techniques.

Specifications:

* Size: 6ft
* Weight: 0.88lbs

Buy More Cables at www.worldofcables.com

www.worldofcables.biz

CABLES TO GO 6ft SCSI-3 MD68M (LATCH CLIP) TO SCSI-1 C50M CABLE

Product Description

Ultra SCSI (or SCSI-3), is the latest of the ever improving SCSI standards, and is the cable of choice for such peripherals as the Iomega Zip Drive. It includes specifications for a single-ended as well as a differential bus style. The single-ended is similar to Fast SCSI-2, except it accommodates addressing up to 32 devices over a 16 bit single cable bus. This new style also increases data through-put up to 20 Mbps in single-ended applications. Single-ended SCSI-3 is limited to 4 devices over 3 meters or 8 devices over 1.5 meters. Differential SCSI refers to a bus configuration using two wires per signal, with the signal being derived by the voltage difference between the two wires. This approach effectively eliminates noise on the SCSI bus and allows bus length to increase up to 25 meters. If you need cables for differential Ultra SCSI applications, please call for help since they require different construction techniques.

Specifications:

* Size: 6ft
* Weight: 0.87lbs

Buy More Cables at www.worldofcables.com

www.worldofcables.biz

CABLES TO GO INTERNAL SCSI-1/SCSI-2 IDC50M ACTIVE TERMINATOR

Product Description

INTERNAL SCSI-1/SCSI-2 IDC50M ACTIVE TERMINATOR

Features:

For internal SCSI-1/SCSI-2 end-of-line termination.
We offer a wide variety of SCSI Terminators to optimize the performance of your SCSI bus - from the popular passive and active terminators for single-ended SCSI applications, to the active negation and hard-to-find, premium-quality forced perfect terminators. Picking the right terminator is vital to the performance of your SCSI chain. A passive terminator is simply a resistor network designed to regulate the impedance in the line, while an active terminator uses a voltage regulator to optimize signal voltage. Active termination is always preferred over passive, and most Worldofcables Active Terminators feature an LED to monitor terminator power line status. Before you can connect your expensive SCSI equipment, make sure you make the right connection with a Worldofcables Terminator!
# Connector: SCSI-1/SCSI-2 IDC 50-pin
# Termination: Active
# Designed For: For internal SCSI-1/SCSI-2 end-of-line termination

Specifications:

Warranty: Lifetime
Color: Black
Mfr: Worldofcables
Weight: 0.14lbs

Buy More Cables at www.worldofcables.com

www.worldofcables.biz

CABLES TO GO INTERNAL SCSI ULTRA160 MD68F LVD/SE TERMINATOR

Product Description

INTERNAL SCSI ULTRA160 MD68F LVD/SE TERMINATOR

Features:

For internal low voltage differential or single-ended SCSI Ultra160 end-of-line termination.
We offer a wide variety of SCSI Terminators to optimize the performance of your SCSI bus - from the popular passive and active terminators for single-ended SCSI applications, to the active negation and hard-to-find, premium-quality forced perfect terminators. Picking the right terminator is vital to the performance of your SCSI chain. LVD/SE terminators supports both the new LVD (Low voltage differential) specification as backwards compatibility to SCSI, SCSI-2, and SPI single-ended specifications. Multimode compatibility permits the use of legacy devices on the bus without hardware alterations. For LVD termination, the terminator integrates two regulated supplies with nine precision resistor strings. For SE termination, one regulator and nine precision 110ohm resistors are used. Automatic mode selection is achieved through voltage detection on the diffsense line. Before you can connect your expensive SCSI equipment, make sure you make the right connection with a Worldofcables Terminator!

* Connector: Ultra2 68-pin Female
* Termination: LVD/SE
* Designed For: For internal low voltage differential or single-ended SCSI Ultra2 end-of-line termination

Specifications:

Warranty: Lifetime
Color: Black
Mfr: Worldofcables
Weight: 0.09lbs

Buy More Cables at www.worldofcables.com

www.worldofcables.biz

0.8 MM / HPDB50 Male, VHDCI 68 SCSI Cable, 3 ft

Product Description
VHDCI 68 (0.8mm) Male / HPDB50 Male, Molded, 3 ft. Screw Type. SCSI III Cable. Black molded PVC hood fully shielded with Aluminum Mylar. Connector wrapped with Aluminum Mylar Foil. Connectors are gold plated. 30 AWG, UL 2464. 25 Twisted Pairs + Drain Wire. Double Shielded with AL-Foil and Copper Braid.

Buy More Cables at www.worldofcables.com

www.worldofcables.biz

CABLES TO GO 3ft SCSI-2 MD50M TO SCSI-1 DB25M CABLE

Product Description

Connects a SCSI-1 peripherall to a SCSI-2 bus or vice-versa

Features:

SCSI-2 Cables provide you with the performance you expect from your SCSI devices. These SCSI-2 cables feature the Micro-Density 50-pin connector found on Fast SCSI-2 host adapters and a DB25-pin connector found on many peripherals. With a Male-to-Male cable you can connect one peripheral directly to another, or to a SCSI host adapter.
Designed with a foil and braid shield overwrapping a twisted-pair construction, providing maximum immunity to EMI/RFI interference combined with a 132 Ohm impedance wire appropriate for faster bus speeds associated with SCSI-2. Shielding of the cable is meticulously handled by soldering 360 degrees from the shielding of the wire to the metal shell which shields the connector. The squeeze latches which fasten the cable to the device are solid, perfectly located for easy plug-in and removal, and ensure an on-going, dependable connection. Molded connectors provide strain relief and add additional protection against EMI/RFI interference.

* Connectors: Micro-Density 50-pin Male to DB-25 Male
* Cable Type: SCSI-2
* Primary Use: Connects a SCSI-1 peripheral to a SCSI-2 bus or vice-versa
* Applications: Scanners, zip drives, external storage devices and other SCSI-1/2 peripherals

Specifications:

* Color: Beige
* Size: 3ft
* Weight: 0.45lbs

Buy More Cables at www.worldofcables.com

www.worldofcables.biz

CABLES TO GO 0.5m SAS 29-PIN to 2 SERIAL ATA/4-PIN POWER CABLE

Product Description
SAS is the next-generation interface standard for SCSI-based systems. It is designed to replace the SCSI parallel interface with much faster, more flexible, 3Gb/s Serial Interface while maintaining the robust nature of the SCSI Command Set.

The flexibility of SAS facilitates many system-level configurations such as workstations, blade servers, external storage arrays, SAS Expanders, Host Bus Adapters (HBA's) and RAID controllers.

Buy More Cables at www.worldofcables.com

www.worldofcables.biz

CABLES TO GO 3ft SCSI-3 MD68M (LATCH CLIP) TO SCSI-2 MD50M CABLE

Product Description

Ultra SCSI (or SCSI-3), is the latest of the ever improving SCSI standards, and is the cable of choice for such peripherals as the Iomega Zip Drive. It includes specifications for a single-ended as well as a differential bus style. The single-ended is similar to Fast SCSI-2, except it accommodates addressing up to 32 devices over a 16 bit single cable bus. This new style also increases data through-put up to 20 Mbps in single-ended applications. Single-ended SCSI-3 is limited to 4 devices over 3 meters or 8 devices over 1.5 meters. Differential SCSI refers to a bus configuration using two wires per signal, with the signal being derived by the voltage difference between the two wires. This approach effectively eliminates noise on the SCSI bus and allows bus length to increase up to 25 meters. If you need cables for differential Ultra SCSI applications, please call for help since they require different construction techniques.

Specifications:

* Size: 3ft
* Weight: 0.46lbs

Buy More Cables at www.worldofcables.com

www.worldofcables.biz

CABLES TO GO 3ft SCSI-2 MD50M TO SCSI-1 DB25M CABLE

Product Description

Connects a SCSI-1 peripherall to a SCSI-2 bus or vice-versa

Features:

SCSI-2 Cables provide you with the performance you expect from your SCSI devices. These SCSI-2 cables feature the Micro-Density 50-pin connector found on Fast SCSI-2 host adapters and a DB25-pin connector found on many peripherals. With a Male-to-Male cable you can connect one peripheral directly to another, or to a SCSI host adapter.
Designed with a foil and braid shield overwrapping a twisted-pair construction, providing maximum immunity to EMI/RFI interference combined with a 132 Ohm impedance wire appropriate for faster bus speeds associated with SCSI-2. Shielding of the cable is meticulously handled by soldering 360 degrees from the shielding of the wire to the metal shell which shields the connector. The squeeze latches which fasten the cable to the device are solid, perfectly located for easy plug-in and removal, and ensure an on-going, dependable connection. Molded connectors provide strain relief and add additional protection against EMI/RFI interference.

* Connectors: Micro-Density 50-pin Male to DB-25 Male
* Cable Type: SCSI-2
* Primary Use: Connects a SCSI-1 peripheral to a SCSI-2 bus or vice-versa
* Applications: Scanners, zip drives, external storage devices and other SCSI-1/2 peripherals

Specifications:

* Color: Beige
* Size: 3ft
* Weight: 0.45lbs

Buy More Cables at www.worldofcables.com

www.worldofcables.biz

CABLES TO GO 6ft SCSI-2 MD50M TO SCSI-1 DB25M CABLE

Product Description

Connects a SCSI-1 peripheral to a SCSI-2 bus or vice-versa

Features:

SCSI-2 Cables provide you with the performance you expect from your SCSI devices. These SCSI-2 cables feature the Micro-Density 50-pin connector found on Fast SCSI-2 host adapters and a DB25-pin connector found on many peripherals. With a Male-to-Male cable you can connect one peripheral directly to another, or to a SCSI host adapter.
Designed with a foil and braid shield overwrapping a twisted-pair construction, providing maximum immunity to EMI/RFI interference combined with a 132 Ohm impedance wire appropriate for faster bus speeds associated with SCSI-2. Shielding of the cable is meticulously handled by soldering 360 degrees from the shielding of the wire to the metal shell which shields the connector. The squeeze latches which fasten the cable to the device are solid, perfectly located for easy plug-in and removal, and ensure an on-going, dependable connection. Molded connectors provide strain relief and add additional protection against EMI/RFI interference.

* Connectors: Micro-Density 50-pin Male to DB-25 Male
* Cable Type: SCSI-2
* Primary Use: Connects a SCSI-1 peripheral to a SCSI-2 bus or vice-versa
* Applications: Scanners, zip drives, external storage devices and other SCSI-1/2 peripherals

Specifications:

* Color: Beige
* Size: 6ft
* Weight: 0.69lbs

Buy More Cables at www.worldofcables.com

www.worldofcables.biz

HPDB68 Male / HPDB50 Male, Mold, 25 Pair, Screw, 6 ft

Product Description
HPDB68 Male / HPDB50 Male, Molded, 6 ft. Screw Type. SCSI III Cable. Beige molded PVC hood fully shielded with Aluminum Mylar. Connector wrapped with Aluminum Mylar Foil. Connectors are gold plated. 28 AWG, UL 2464. 25 Twisted Pairs + Drain Wire. Double Shielded with AL-Foil and Copper Braid.

Buy More Cables at www.worldofcables.com

www.worldofcables.biz

HPDB68 Male / Centronics 50 (CN50) Male, Mold, 25 Pair, D / S, Latch, 3 ft

Product Description
HPDB68 Male / CN50 Male, Molded, 3 ft. Latch Type. SCSI III Cable. Beige molded PVC hood fully shielded with Aluminum Mylar. Connector wrapped with Aluminum Mylar Foil. Connectors are gold plated. 28 AWG, UL 2464. 25 Twisted Pairs + Drain Wire. Double Shielded with AL-Foil and Copper Braid.

Buy More Cables at www.worldofcables.com

www.worldofcables.biz

HPDB68 Male / Centronics 50 (CN50) Male, Mold, 25 Pair, Screw, 6 ft

Product Description
HPDB68 Male / CN50 Male, Molded, 3 ft. Screw Type. SCSI III Cable. Beige molded PVC hood fully shielded with Aluminum Mylar. Connector wrapped with Aluminum Mylar Foil. Connectors are gold plated. 28 AWG, UL 2464. 25 Twisted Pairs + Drain Wire. Double Shielded with AL-Foil and Copper Braid.

Buy More Cables at www.worldofcables.com

www.worldofcables.biz

HPDB50 Male / HPDB50 Male, Mold, 25 Pair, 3 ft

Product Description
HPDB50 Male / HPDB50 Male, Molded, 3 ft. SCSI II Cable. Beige molded PVC hood fully shielded with Aluminum Mylar. Connector wrapped with Aluminum Mylar Foil. Connectors are gold plated. 28 AWG, UL 2464. 25 Twisted Pairs + Drain Wire. Double Shielded with AL-Foil and Copper Braid.

Buy More Cables at www.worldofcables.com

www.worldofcables.biz

Serial ATA (SATA) Cable, 150Mbps, 0.5 Meter (1.5 ft)

Product Description
Serial ATA Data Cable, 0.5 Meter (1.6 ft), 150Mbps. Serial ATA cable is a great deal smaller and so is less intrusive in the case. Also the IDE cable is limited to 40 CM in length while the serial ATA cable does not have this restriction. Why choose serial over the current Parallel data transfer method. Well there are two main reasons for this. Firstly, having data sent in parallel requires a lot of signal being sent at the same time, this causes electrical interference and can have problem, using serial transfer means you only need a send and receive signal. The second reason is if you are sending data in parallel you have to have a lot more wires. You know that an IDE cable can be a real pain when trying to keep a system cool and running smoothly. They also get in the way of other wires running throughout the system. All of the other data transfer standards we use today are based on the serial data transfer system, USB, Ethernet and Firewire.

Serial ATA cable is a great deal smaller and so is less intrusive in the case. Also the IDE cable is limited to 40 CM in length while the serial ATA cable does not have this restriction


Buy More Cables at www.worldofcables.com

www.worldofcables.biz

SCSI III (HPDB68 Male) Internal Cable, 8C, 7 Device, 40 inch

Buy More Cables at www.worldofcables.com

www.worldofcables.biz

Ultra 160/320 LVD HPDB68M SCSI Internal Cable with LVD Terminator,6C, 4 Devices, Round, 42 inch

Buy More Cables at www.worldofcables.com

www.worldofcables.biz

LVD-320 Round Cable TPO with PET sleeve 12"

Buy More Cables at www.worldofcables.com

www.worldofcables.biz

ATA-100/133, FC 40 pin (80C) x 3, 30 AWG, 40TP Black Round Cable, 24 inch

Product Description
IDC 40 x 3, ATA-100, 24 inch Dual Connector, Round. Round IDE cables are much more flexible than regular IDE cables. Due to them being much thinner it makes for better air flow throughout the computer. IDE cables are designed to connect internal devices in your computer to the motherboard. The devices would include; CD-ROMs, Zip Drives, Hard Drives, DVD-ROMs, CD Burners, etc… IDE slots on the motherboard can only support up to 2 devices. Some IDE cables have more connectors. Those cables are for cases or situations where you need to have a longer cable or to have some variety and options to place the devices where you choose.

Specifications ATA 100 Rounded Flat Cables - Impedence: Differential=130+-10Ohm Single Ended=100+-10Ohm - 24" FC40pin(80C)x3 30AWG 40Twisted Pair Jacket:Foam PE+Skin Aluminum Foil+Braid Shield

Buy More Cables at www.worldofcables.com

www.worldofcables.biz

ATA-100/133, FC 40 pin (80C) x 3, 30 AWG, 40TP Blue Round Cable, 24 inch

Product Description
IDC 40 x 3, ATA-100, 24 inch Dual Connector, Round. Round IDE cables are much more flexible than regular IDE cables. Due to them being much thinner it makes for better air flow throughout the computer. IDE cables are designed to connect internal devices in your computer to the motherboard. The devices would include; CD-ROMs, Zip Drives, Hard Drives, DVD-ROMs, CD Burners, etc… IDE slots on the motherboard can only support up to 2 devices. Some IDE cables have more connectors. Those cables are for cases or situations where you need to have a longer cable or to have some variety and options to place the devices where you choose.

Specifications ATA 100 Rounded Flat Cables - Impedence: Differential=130+-10Ohm Single Ended=100+-10Ohm - 24" FC40pin(80C)x3 30AWG 40Twisted Pair Jacket:Foam PE+Skin Aluminum Foil+Braid Shield

Buy More Cables at www.worldofcables.com

www.worldofcables.biz

ATA-100/133, FC 40 pin (80C) x 3, 30 AWG, 40TP Blue Round Cable, 24 inch

Product Description
IDC 40 x 3, ATA-100, 24 inch Dual Connector, Round. Round IDE cables are much more flexible than regular IDE cables. Due to them being much thinner it makes for better air flow throughout the computer. IDE cables are designed to connect internal devices in your computer to the motherboard. The devices would include; CD-ROMs, Zip Drives, Hard Drives, DVD-ROMs, CD Burners, etc… IDE slots on the motherboard can only support up to 2 devices. Some IDE cables have more connectors. Those cables are for cases or situations where you need to have a longer cable or to have some variety and options to place the devices where you choose.

Specifications ATA 100 Rounded Flat Cables - Impedence: Differential=130+-10Ohm Single Ended=100+-10Ohm - 24" FC40pin(80C)x3 30AWG 40Twisted Pair Jacket:Foam PE+Skin Aluminum Foil+Braid Shield

Buy More Cables at www.worldofcables.com

www.worldofcables.biz

Ultra ATA 100/133 TPO, IDC 40 x 3, 24in 100MB / sec

Product Description
IDC 40 x 3, ATA-100, 24 inch Dual Connector. IDE cables are designed to connect internal devices in your computer to the motherboard. The devices would include; CD-ROMs, Zip Drives, Hard Drives, DVD-ROMs, CD Burners, etc… IDE slots on the motherboard can only support up to 2 devices. Some IDE cables have more connectors. Those cables are for cases or situations where you need to have a longer cable or to have some variety and options to place the devices where you choose.

Buy More Cables at www.worldofcables.com

www.worldofcables.biz

ATA-100/133, FC 40 pin (80C) x 3, 30 AWG, 40TP Black Round Cable, 18 inch

Product Description

IDC 40 x 3, ATA-100, 18 inch Dual Connector, Round. Round IDE cables are much more flexible than regular IDE cables. Due to them being much thinner it makes for better air flow throughout the computer. IDE cables are designed to connect internal devices in your computer to the motherboard. The devices would include; CD-ROMs, Zip Drives, Hard Drives, DVD-ROMs, CD Burners, etc… IDE slots on the motherboard can only support up to 2 devices. Some IDE cables have more connectors. Those cables are for cases or situations where you need to have a longer cable or to have some variety and options to place the devices where you choose.

Specifications ATA 100 Rounded Flat Cables - Impedence: Differential=130+-10Ohm Single Ended=100+-10Ohm - 18" FC40pin(80C)x3 30AWG 40Twisted Pair Jacket:Foam PE+Skin Aluminum Foil+Braid Shield

Buy More Cables at www.worldofcables.com

www.worldofcables.biz

Ultra ATA 100/133 TPO, IDC 40 x 3, 18 inch, 100MB / sec

Buy More Cables at www.worldofcables.com

www.worldofcables.biz

Floppy Cable Dual IDC 18 inch + 12 inch (IDC34 x 3)

Buy More Cables at www.worldofcables.com

www.worldofcables.biz

Floppy Cable Dual IDC 24 inch (IDC34 x 3)


Buy More Cables at www.worldofcables.com

www.worldofcables.biz

IDC34 x 4 / CE34 x 2, 46 inch Floppy Cable

Product Description
IDC 34 x 4 / CE34 x 2, 46 inch Floppy Cable. This cable is to connect an internal floppy drive to the motherboard.

Buy More Cables at www.worldofcables.com